d398a6ced2
- CitrineOS core extracted (CSMS OCPP 2.0.1) - OpenOCPP extracted (firmware OCPP 1.6J/2.0.1) - ShapeShifter library installed (pip install -e) - ShapeShifter specification extracted - EVerest extracted TODO updated with progress
59 lines
2.2 KiB
C++
59 lines
2.2 KiB
C++
// SPDX-License-Identifier: Apache-2.0
|
|
// Copyright Frickly Systems GmbH
|
|
// Copyright Pionix GmbH and Contributors to EVerest
|
|
|
|
#include "registers.hpp"
|
|
|
|
std::string_view to_string(DeviceFault_30001 code) noexcept {
|
|
switch (code) {
|
|
case DeviceFault_30001::NoFailure:
|
|
return "No failure";
|
|
case DeviceFault_30001::BrokenWire_L_PosNeg:
|
|
return "Broken wire detection L(+)/L(-)";
|
|
case DeviceFault_30001::BrokenWire_PE1_PE2:
|
|
return "Broken wire detection PE1/PE2";
|
|
case DeviceFault_30001::InternalFailure_TestMode_Int1:
|
|
return "Internal failure detected in test mode (Int. 1)";
|
|
case DeviceFault_30001::ParameterFailure_PotentiometerSetting:
|
|
return "Parameter failures (Incorrect setting of potentiometers on the device)";
|
|
case DeviceFault_30001::CommunicationFault_Modbus:
|
|
return "Communication fault Modbus";
|
|
case DeviceFault_30001::ChecksumFailure_EEPROM_Int2:
|
|
return "Checksum failure EEPROM (Int. 2)";
|
|
case DeviceFault_30001::InternalCommunicationFault_Int3:
|
|
return "Internal communication fault (Int. 3)";
|
|
case DeviceFault_30001::InternalError_Int4:
|
|
return "Internal error 4 (Int. 4)";
|
|
}
|
|
return "Unknown code";
|
|
}
|
|
|
|
std::string_view to_string(DeviceState_30002 state) noexcept {
|
|
switch (state) {
|
|
case DeviceState_30002::Initializing:
|
|
return "Initializing";
|
|
case DeviceState_30002::Measuring:
|
|
return "Ready and measuring";
|
|
case DeviceState_30002::ErrorMode:
|
|
return "Error mode";
|
|
case DeviceState_30002::SelfTesting:
|
|
return "Selftesting";
|
|
case DeviceState_30002::AdvancedTest:
|
|
return "Selftest in advanced test mode";
|
|
case DeviceState_30002::MeasuringStopped:
|
|
return "Measuring stopped";
|
|
case DeviceState_30002::Measuring_AlarmExceeded:
|
|
return "Measuring, alarm is exceeded";
|
|
case DeviceState_30002::Measuring_PreAlarmExceeded:
|
|
return "Measuring, pre-alarm is exceeded";
|
|
}
|
|
return "Unknown state";
|
|
}
|
|
|
|
uint32_t insulation_resistance_to_ohm(uint16_t insulation_resistance_100ohm) noexcept {
|
|
if (insulation_resistance_100ohm == 0xFFFF) {
|
|
return 2000001; // > 2MOhm
|
|
}
|
|
return static_cast<std::uint32_t>(insulation_resistance_100ohm) * 100;
|
|
}
|