d398a6ced2
- CitrineOS core extracted (CSMS OCPP 2.0.1) - OpenOCPP extracted (firmware OCPP 1.6J/2.0.1) - ShapeShifter library installed (pip install -e) - ShapeShifter specification extracted - EVerest extracted TODO updated with progress
140 lines
4.2 KiB
YAML
140 lines
4.2 KiB
YAML
description: IMD driver for Bender isoCHA425HV IMD devices.
|
|
provides:
|
|
main:
|
|
description: Implementation of the driver functionality
|
|
interface: isolation_monitor
|
|
config:
|
|
imd_device_id:
|
|
description: The IMD's address on the ModBus
|
|
type: integer
|
|
minimum: 0
|
|
maximum: 255
|
|
default: 3
|
|
r1_prealarm_kohm:
|
|
description: >-
|
|
3005 The IMD's internal measurement resistance for signaling an alarm in kiloohms
|
|
(the internal resistance is only used for switching the IMDs relays,
|
|
EVerest handles any isolation issue internaly inside the EVSE manager)
|
|
Note the maximum value is 600k on isoCHA and 500k on isoEV units.
|
|
type: integer
|
|
minimum: 15
|
|
maximum: 600
|
|
default: 250
|
|
r2_alarm_kohm:
|
|
description: >-
|
|
3007 This value must be smaller than r1_prealarm_kohm
|
|
type: integer
|
|
minimum: 15
|
|
maximum: 600
|
|
default: 100
|
|
undervoltage_alarm_enable:
|
|
description: >-
|
|
3008 Enable under voltage alarm
|
|
type: boolean
|
|
default: false
|
|
undervoltage_alarm_threshold_V:
|
|
description: >-
|
|
3009 Threshold in volt for the under voltage alarm
|
|
type: integer
|
|
default: 30
|
|
overvoltage_alarm_enable:
|
|
description: >-
|
|
3010 Enable over voltage alarm
|
|
type: boolean
|
|
default: false
|
|
overvoltage_alarm_threshold_V:
|
|
description: >-
|
|
3011 Threshold in volt for the over voltage alarm
|
|
type: integer
|
|
default: 1050
|
|
alarm_memory_enable:
|
|
description: >-
|
|
3012 Enable memory for alarm events
|
|
type: boolean
|
|
default: false
|
|
relais_r1_mode:
|
|
description: >-
|
|
3013 false: normally open, true: normally closed
|
|
type: boolean
|
|
default: false
|
|
relais_r2_mode:
|
|
description: >-
|
|
3014 false: normally open, true: normally closed
|
|
type: boolean
|
|
default: false
|
|
delay_startup_device:
|
|
description: >-
|
|
3018 Delay when device is starting up
|
|
type: integer
|
|
maximum: 10
|
|
minimum: 0
|
|
default: 5
|
|
delay_t_on_k1_k2:
|
|
description: >-
|
|
3019 delay for switching relais on
|
|
type: integer
|
|
maximum: 99
|
|
minimum: 0
|
|
default: 5
|
|
delay_t_off_k1_k2:
|
|
description: >-
|
|
3020 delay for switching relais off
|
|
type: integer
|
|
maximum: 99
|
|
minimum: 0
|
|
default: 5
|
|
chademo_mode:
|
|
description: >-
|
|
3023: false: CCS, true: ChaDeMo
|
|
type: boolean
|
|
default: false
|
|
selftest_enable_gridconnection:
|
|
description: >-
|
|
3024: Test grid connection while testing device nEt
|
|
type: boolean
|
|
default: false
|
|
selftest_enable_at_start:
|
|
description: >-
|
|
3025 Perform self test at start up of device
|
|
type: boolean
|
|
default: true
|
|
relay_k1_alarm_assignment:
|
|
description: >-
|
|
3027 Alarm assignment of relay K1 "r1". Bitmask: S.AL(11) Ue>(10) Ce>(9) test(8) U>(7) U<(6) -R2<(5) +R2<(4) -R1<(3) +R1<(2) Err(1)
|
|
type: integer
|
|
minimum: 0
|
|
maximum: 65535
|
|
default: 0
|
|
relay_k2_alarm_assignment:
|
|
description: >-
|
|
3028 Alarm assignment of relay K2 "r2". Bitmask: S.AL(11) Ue>(10) Ce>(9) test(8) U>(7) U<(6) -R2<(5) +R2<(4) -R1<(3) +R1<(2) Err(1)
|
|
type: integer
|
|
minimum: 0
|
|
maximum: 65535
|
|
default: 0
|
|
always_publish_measurements:
|
|
description: >-
|
|
Always publish measurement even if stopped by EVerest
|
|
type: boolean
|
|
default: false
|
|
voltage_to_earth_monitoring_alarm_enable:
|
|
description: >-
|
|
3000 Enable over voltage to earth monitoring alarm
|
|
type: boolean
|
|
default: false
|
|
disable_device_on_stop:
|
|
description: >-
|
|
Disable the device upon stop measurement
|
|
type: boolean
|
|
default: false
|
|
requires:
|
|
serial_comm_hub:
|
|
interface: serial_communication_hub
|
|
metadata:
|
|
license: https://opensource.org/licenses/Apache-2.0
|
|
authors:
|
|
- Cornelius Claussen
|
|
- Florin Mihut
|
|
- Jan Christoph Habig
|
|
- Lars Dieckmann
|