d398a6ced2
- CitrineOS core extracted (CSMS OCPP 2.0.1) - OpenOCPP extracted (firmware OCPP 1.6J/2.0.1) - ShapeShifter library installed (pip install -e) - ShapeShifter specification extracted - EVerest extracted TODO updated with progress
238 lines
7.2 KiB
YAML
238 lines
7.2 KiB
YAML
description: Driver module for Phytec PhyVerso EV Charging controller with Pionix MCU firmware
|
|
config:
|
|
serial_port:
|
|
description: Serial port the hardware is connected to
|
|
type: string
|
|
default: /dev/ttyUSB0
|
|
baud_rate:
|
|
description: Serial baud rate to use when communicating with the hardware
|
|
type: integer
|
|
minimum: 9600
|
|
maximum: 230400
|
|
default: 115200
|
|
reset_gpio:
|
|
description: If set <0 it is disabled. If > 0, configured reset_gpio_bank and reset_gpio_pin configuration is used for hard reset of MCU
|
|
type: integer
|
|
minimum: -1
|
|
maximum: 1000
|
|
default: -1
|
|
conn1_max_current_A_import:
|
|
description: Maximum import current in amps
|
|
type: integer
|
|
minimum: 0
|
|
default: 16
|
|
conn1_min_current_A_import:
|
|
description: Minimum import current in amps
|
|
type: integer
|
|
minimum: 0
|
|
default: 6
|
|
conn1_min_phase_count_import:
|
|
description: Minimum phase count for import
|
|
type: integer
|
|
minimum: 1
|
|
maximum: 3
|
|
default: 3
|
|
conn1_max_phase_count_import:
|
|
description: Maximum phase count for import
|
|
type: integer
|
|
minimum: 1
|
|
maximum: 3
|
|
default: 3
|
|
conn1_min_current_A_export:
|
|
description: Minimum export current in amps
|
|
type: integer
|
|
minimum: 0
|
|
maximum: 63
|
|
default: 0
|
|
conn1_max_current_A_export:
|
|
description: Maximum export current in amps
|
|
type: integer
|
|
minimum: 0
|
|
maximum: 63
|
|
default: 0
|
|
conn1_min_phase_count_export:
|
|
description: Minimum phase count for export
|
|
type: integer
|
|
minimum: 1
|
|
maximum: 3
|
|
default: 3
|
|
conn1_max_phase_count_export:
|
|
description: Maximum phase count for export
|
|
type: integer
|
|
minimum: 1
|
|
maximum: 3
|
|
default: 3
|
|
conn1_has_socket:
|
|
description: Set to true if it has a socket, false if it has a permanently attached cable
|
|
type: boolean
|
|
default: false
|
|
conn1_dc:
|
|
description: Set to true if it is for DC, false if it is AC
|
|
type: boolean
|
|
default: false
|
|
conn2_max_current_A_import:
|
|
description: Maximum import current in amps
|
|
type: integer
|
|
minimum: 0
|
|
default: 16
|
|
conn2_min_current_A_import:
|
|
description: Minimum import current in amps
|
|
type: integer
|
|
minimum: 0
|
|
default: 6
|
|
conn2_min_phase_count_import:
|
|
description: Minimum phase count for import
|
|
type: integer
|
|
minimum: 1
|
|
maximum: 3
|
|
default: 3
|
|
conn2_max_phase_count_import:
|
|
description: Maximum phase count for import
|
|
type: integer
|
|
minimum: 1
|
|
maximum: 3
|
|
default: 3
|
|
conn2_min_current_A_export:
|
|
description: Minimum export current in amps
|
|
type: integer
|
|
minimum: 0
|
|
maximum: 63
|
|
default: 0
|
|
conn2_max_current_A_export:
|
|
description: Maximum export current in amps
|
|
type: integer
|
|
minimum: 0
|
|
maximum: 63
|
|
default: 0
|
|
conn2_min_phase_count_export:
|
|
description: Minimum phase count for export
|
|
type: integer
|
|
minimum: 1
|
|
maximum: 3
|
|
default: 3
|
|
conn2_max_phase_count_export:
|
|
description: Maximum phase count for export
|
|
type: integer
|
|
minimum: 1
|
|
maximum: 3
|
|
default: 3
|
|
conn2_has_socket:
|
|
description: Set to true if it has a socket, false if it has a permanently attached cable
|
|
type: boolean
|
|
default: false
|
|
conn2_dc:
|
|
description: Set to true if it is for DC, false if it is AC
|
|
type: boolean
|
|
default: false
|
|
reset_gpio_bank:
|
|
description: GPIO peripheral bank the nRST pin of the MCU is mapped to
|
|
type: integer
|
|
default: 1
|
|
reset_gpio_pin:
|
|
description: GPIO peripheral pin the nRST pin of the MCU is mapped to
|
|
type: integer
|
|
default: 23
|
|
conn1_motor_lock_type:
|
|
description: >
|
|
Connector 1 motor lock type;
|
|
-1 == no Lock
|
|
1 == Hella Style time-based lock,
|
|
2 == Valeo potentiometer feedback based;
|
|
|
|
If charging port has a socket and is AC charging, it will need a lock specified
|
|
type: integer
|
|
default: -1
|
|
conn2_motor_lock_type:
|
|
description: >
|
|
Connector 2 motor lock type;
|
|
-1 == no Lock
|
|
1 == Hella Style time-based lock,
|
|
2 == Valeo potentiometer feedback based;
|
|
|
|
If charging port has a socket and is AC charging, it will need a lock specified
|
|
type: integer
|
|
default: -1
|
|
conn1_gpio_stop_button_enabled:
|
|
description: Set to true to enable external charging stop button for connector 1 on a GPIO connected to the SOM
|
|
type: boolean
|
|
default: false
|
|
conn1_gpio_stop_button_bank:
|
|
description: GPIO peripheral bank for connector 1 stop button
|
|
type: string
|
|
default: gpiochip1
|
|
conn1_gpio_stop_button_pin:
|
|
description: GPIO peripheral pin for connector 1 stop button
|
|
type: integer
|
|
default: 36
|
|
conn1_gpio_stop_button_invert:
|
|
description: Set to true to invert pin logic
|
|
type: boolean
|
|
default: false
|
|
conn2_gpio_stop_button_enabled:
|
|
description: Set to true to enable external charging stop button for connector 2 on a GPIO connected to the SOM
|
|
type: boolean
|
|
default: false
|
|
conn2_gpio_stop_button_bank:
|
|
description: GPIO peripheral bank for connector 2 stop button
|
|
type: string
|
|
default: gpiochip1
|
|
conn2_gpio_stop_button_pin:
|
|
description: GPIO peripheral pin for connector 2 stop button
|
|
type: integer
|
|
default: 37
|
|
conn2_gpio_stop_button_invert:
|
|
description: Set to true to invert pin logic
|
|
type: boolean
|
|
default: false
|
|
conn1_disable_port:
|
|
description: Set to true if port 1 is neither used for AC nor DC charging (will overwrite conn1_dc parameter)
|
|
type: boolean
|
|
default: false
|
|
conn2_disable_port:
|
|
description: Set to true if port 2 is neither used for AC nor DC charging (will overwrite conn2_dc parameter)
|
|
type: boolean
|
|
default: false
|
|
conn1_feedback_active_low:
|
|
description: Set to true if relay mirror contact on port 1 feedback is active LOW, false if active HIGH; don't change for AC port config
|
|
type: boolean
|
|
default: true
|
|
conn2_feedback_active_low:
|
|
description: Set to true if relay mirror contact on port 2 feedback is active LOW, false if active HIGH; don't change for AC port config
|
|
type: boolean
|
|
default: true
|
|
conn1_feedback_pull:
|
|
description: DC port config only - specify which way internal pull resistors will work; 0 -> None, 1 -> PullUp, 2 -> PullDown (default=PD)
|
|
type: integer
|
|
default: 2
|
|
conn2_feedback_pull:
|
|
description: DC port config only - specify which way internal pull resistors will work; 0 -> None, 1 -> PullUp, 2 -> PullDown (default=PD)
|
|
type: integer
|
|
default: 2
|
|
|
|
provides:
|
|
connector_1:
|
|
interface: evse_board_support
|
|
description: provides the board support interface to low level control the proximity and control pilots, relais and motor lock
|
|
connector_2:
|
|
interface: evse_board_support
|
|
description: provides the board support interface to low level control the proximity and control pilots, relais and motor lock
|
|
rcd_1:
|
|
interface: ac_rcd
|
|
description: RCD interface for an external RDC-MD
|
|
rcd_2:
|
|
interface: ac_rcd
|
|
description: RCD interface of the onboard RDC-MD
|
|
connector_lock_1:
|
|
interface: connector_lock
|
|
description: Lock interface
|
|
connector_lock_2:
|
|
interface: connector_lock
|
|
description: Lock interface
|
|
enable_telemetry: true
|
|
metadata:
|
|
license: https://opensource.org/licenses/Apache-2.0
|
|
authors:
|
|
- Cornelius Claussen
|
|
- Jonas Rockstroh
|
|
|