d398a6ced2
- CitrineOS core extracted (CSMS OCPP 2.0.1) - OpenOCPP extracted (firmware OCPP 1.6J/2.0.1) - ShapeShifter library installed (pip install -e) - ShapeShifter specification extracted - EVerest extracted TODO updated with progress
30 lines
854 B
YAML
30 lines
854 B
YAML
description: Driver module for EV side for the YETI hardware
|
|
config:
|
|
serial_port:
|
|
description: Serial port the Yeti hardware is connected to
|
|
type: string
|
|
default: /dev/ttyUSB0
|
|
baud_rate:
|
|
description: Serial baud rate to use when communicating with Yeti hardware
|
|
type: integer
|
|
minimum: 9600
|
|
maximum: 230400
|
|
default: 115200
|
|
reset_gpio:
|
|
description: Reset GPIO number to use to HW reset Yeti. If set <0 it is disabled.
|
|
type: integer
|
|
minimum: -1
|
|
maximum: 1000
|
|
default: -1
|
|
provides:
|
|
ev_board_support:
|
|
interface: ev_board_support
|
|
description: provides the board support Interface to low level control control pilot, relais, rcd
|
|
enable_telemetry: true
|
|
metadata:
|
|
license: https://opensource.org/licenses/Apache-2.0
|
|
authors:
|
|
- Cornelius Claussen
|
|
- Sebastian Lukas
|
|
- Piet Gömpel
|