d398a6ced2
- CitrineOS core extracted (CSMS OCPP 2.0.1) - OpenOCPP extracted (firmware OCPP 1.6J/2.0.1) - ShapeShifter library installed (pip install -e) - ShapeShifter specification extracted - EVerest extracted TODO updated with progress
90 lines
2.3 KiB
YAML
90 lines
2.3 KiB
YAML
description: Driver module for the Texas Instruments TIDA-010939 reference design
|
|
config:
|
|
serial_port:
|
|
description: Serial port the TIDA010939 hardware is connected to
|
|
type: string
|
|
default: /dev/ttyUSB0
|
|
baud_rate:
|
|
description: Serial baud rate to use when communicating with TIDA010939 hardware
|
|
type: integer
|
|
minimum: 9600
|
|
maximum: 230400
|
|
default: 115200
|
|
reset_gpio_chip:
|
|
description: >-
|
|
Reset GPIO chip to use to HW reset TIDA010939. If set to empty string, it is disabled.
|
|
type: string
|
|
default: 'gpiochip0'
|
|
reset_gpio:
|
|
description: GPIO line to use to reset TIDA010939
|
|
type: integer
|
|
default: 27
|
|
max_current_A_import:
|
|
description: Maximum import current in amps
|
|
type: integer
|
|
minimum: 0
|
|
default: 16
|
|
min_current_A_import:
|
|
description: Minimum import current in amps
|
|
type: integer
|
|
minimum: 0
|
|
default: 6
|
|
min_phase_count_import:
|
|
description: Minimum phase count for import
|
|
type: integer
|
|
minimum: 1
|
|
maximum: 3
|
|
default: 3
|
|
max_phase_count_import:
|
|
description: Maximum phase count for import
|
|
type: integer
|
|
minimum: 1
|
|
maximum: 3
|
|
default: 3
|
|
min_current_A_export:
|
|
description: Minimum export current in amps
|
|
type: integer
|
|
minimum: 0
|
|
maximum: 63
|
|
default: 0
|
|
max_current_A_export:
|
|
description: Maximum export current in amps
|
|
type: integer
|
|
minimum: 0
|
|
maximum: 63
|
|
default: 0
|
|
min_phase_count_export:
|
|
description: Minimum phase count for export
|
|
type: integer
|
|
minimum: 1
|
|
maximum: 3
|
|
default: 3
|
|
max_phase_count_export:
|
|
description: Maximum phase count for export
|
|
type: integer
|
|
minimum: 1
|
|
maximum: 3
|
|
default: 3
|
|
has_socket:
|
|
description: Set to true if it has a socket, false if it has a permanently attached cable
|
|
type: boolean
|
|
default: false
|
|
provides:
|
|
board_support:
|
|
interface: evse_board_support
|
|
description: provides the board support Interface to low level control control pilot, relais, motor lock
|
|
rcd:
|
|
interface: ac_rcd
|
|
description: RCD interface of the onboard RCD
|
|
connector_lock:
|
|
interface: connector_lock
|
|
description: Interface for the motor lock
|
|
metadata:
|
|
license: https://opensource.org/licenses/Apache-2.0
|
|
authors:
|
|
- Cornelius Claussen
|
|
- Kai-Uwe Hermann
|
|
- Thilo Molitor
|
|
- Anton Wöllert
|
|
- Fabian Gajek
|