d398a6ced2
- CitrineOS core extracted (CSMS OCPP 2.0.1) - OpenOCPP extracted (firmware OCPP 1.6J/2.0.1) - ShapeShifter library installed (pip install -e) - ShapeShifter specification extracted - EVerest extracted TODO updated with progress
46 lines
1.3 KiB
YAML
46 lines
1.3 KiB
YAML
description: Driver module for the Micro Mega Watt DC Charging Tester v1.0
|
|
config:
|
|
serial_port:
|
|
description: Serial port the uMWC hardware is connected to
|
|
type: string
|
|
default: /dev/ttyUSB0
|
|
baud_rate:
|
|
description: Serial baud rate to use when communicating with uMWC hardware
|
|
type: integer
|
|
minimum: 9600
|
|
maximum: 230400
|
|
default: 115200
|
|
reset_gpio_chip:
|
|
description: >-
|
|
Reset GPIO chip to use to HW reset uMWC. If set to empty string, it is disabled.
|
|
type: string
|
|
default: 'gpiochip0'
|
|
reset_gpio:
|
|
description: GPIO line to use to reset uMWC
|
|
type: integer
|
|
default: 27
|
|
dc_max_voltage:
|
|
description: Maximum voltage to support
|
|
type: integer
|
|
minimum: 50
|
|
maximum: 1000
|
|
default: 1000
|
|
connector_id:
|
|
description: Connector id
|
|
type: integer
|
|
default: 1
|
|
provides:
|
|
dc_supply:
|
|
interface: power_supply_DC
|
|
description: Interface for the DC/DC output supply
|
|
powermeter:
|
|
interface: powermeter
|
|
description: Interface for the powermeter
|
|
board_support:
|
|
interface: evse_board_support
|
|
description: provides the board support Interface to low level control control pilot, relais, rcd, motor lock
|
|
enable_external_mqtt: true
|
|
metadata:
|
|
license: https://opensource.org/licenses/Apache-2.0
|
|
authors:
|
|
- Cornelius Claussen |