description: Driver for InfyPower ACDC power supply. Supports multiple InfyPower modules using V1.13 CAN protocol either in fixed address mode or group discovery mode.
config:
  can_device:
    description: CAN interface name
    type: string
    default: can0
  module_addresses:
    description: >-
      Module Addresses to use. Set to "0" for broadcast. Make sure to connect only one PSU on the CAN bus in broadcast mode, otherwise
      it will charge at a too high current (as every module will produce the full current the EV requests!)
      If you have multiple PSUs, use individual addresses and list them comma separated, e.g. "1,2". Then it will share the current between
      these PSUs.
    type: string
    default: ""
  group_address:
    description: >-
      Group address/dial setting. Use this if your PSUs using automatic allocation of the addresses.
      If you have multiple PSUs, set this number in accordance with the group dial
      setting of the PSUs you want to use. Check the PSU manual for details but
      the DIAL is sometimes in format 8421 (left MSB and right LSB).
      Can't use module addresses and group address at the same time, if both are set, the module addresses will be used.
    type: integer
    default: 0
  device_connection_timeout_s:
    description: >-
      Timeout in seconds to wait for a module to respond before considering it offline.
      CRITICAL SAFETY: Must be > 10s (module internal timeout) to prevent overcurrent risk.
      Recommended: 15s.
    type: integer
    default: 15
  conversion_efficiency_export:
    description: Conversion efficiency of the export mode.
    type: number
    default: 0.95
  controller_address:
    description: Controller address defaults to 0xF0.
    type: integer
    default: 240
provides:
  main:
    description: Main interface
    interface: power_supply_DC
    config: {}
metadata:
  license: https://opensource.org/licenses/Apache-2.0
  authors:
  - Florin Mihut