description: Board support package module for the AD-ACEVSE22KWZ-KIT reference design
config:
  serial_port:
    description: Serial port the AD-ACEVSE22KWZ-KIT is connected to
    type: string
    default: /dev/ttyUSB0
  baud_rate:
    description: Serial baud rate to use when communicating with the AD-ACEVSE22KWZ-KIT
    type: integer
    minimum: 9600
    maximum: 230400
    default: 115200
  reset_gpio_chip:
    description: >-
      Reset GPIO chip to use to HW reset the AD-ACEVSE22KWZ-KIT. If set to empty string, it is disabled.
    type: string
    default: 'gpiochip0'
  reset_gpio:
    description: GPIO line to use to reset AD-ACEVSE22KWZ-KIT
    type: integer
    default: 27
  caps_min_current_A:
    description: Minimal current on AC side. For AC this is typically 6, but for HLC this can be less. -1 means use limit reported by HW.
    type: integer
    default: -1
  caps_max_current_A:
    description: Maximum current on AC side. For AC this is typically 16 or 32, but for HLC this can be less. -1 means use limit reported by HW.
    type: integer
    default: -1
provides:
  powermeter:
    interface: powermeter
    description: provides the AD-ACEVSE22KWZ-KIT Internal Power Meter
  board_support:
    interface: evse_board_support
    description: provides the board support Interface to low level control control pilot, relais, motor lock
enable_telemetry: true
metadata:
  license: https://opensource.org/licenses/Apache-2.0
  authors:
    - Cornelius Claussen
    - Kai-Uwe Hermann
    - Thilo Molitor
    - Anton Wöllert
    - Ryan Wiebe