description: Driver module for the Micro Mega Watt DC Charging Tester v1.0
config:
  serial_port:
    description: Serial port the uMWC hardware is connected to
    type: string
    default: /dev/ttyUSB0
  baud_rate:
    description: Serial baud rate to use when communicating with uMWC hardware
    type: integer
    minimum: 9600
    maximum: 230400
    default: 115200
  reset_gpio_chip:
    description: >-
      Reset GPIO chip to use to HW reset uMWC. If set to empty string, it is disabled.
    type: string
    default: 'gpiochip0'
  reset_gpio:
    description: GPIO line to use to reset uMWC
    type: integer
    default: 27
  dc_max_voltage:
    description: Maximum voltage to support
    type: integer
    minimum: 50
    maximum: 1000
    default: 1000
  connector_id:
    description: Connector id
    type: integer
    default: 1
provides:
  dc_supply:
    interface: power_supply_DC
    description: Interface for the DC/DC output supply
  powermeter:
    interface: powermeter
    description: Interface for the powermeter
  board_support:
    interface: evse_board_support
    description: provides the board support Interface to low level control control pilot, relais, rcd, motor lock
enable_external_mqtt: true
metadata:
  license: https://opensource.org/licenses/Apache-2.0
  authors:
    - Cornelius Claussen