description: DC Power Supply Driver
provides:
  main:
    description: Power supply driver for DPM 1000-30 from SCU Power. Currently supports only one module.
    interface: power_supply_DC
config:
  device:
    description: Interface name for can device
    type: string
    default: can0
  device_address:
    description: Device address (as selected on front LED panel)
    type: integer
    default: 0
  power_limit_W:
    description: Maximum Power Limit in Watt
    type: number
    maximum: 30000
    default: 30000
  current_limit_A:
    description: Maximum Current Limit in Ampere
    type: number
    maximum: 100
    default: 100
  voltage_limit_V:
    description: Maximum Voltage Limit in Volt. Will be limited by series parallel setting as well.
    type: number
    maximum: 1000
    default: 1000
  series_parallel_mode:
    description: 
      Select series (300-1000V), parallel (50-500) or automatic switching mode (50-1000). 
      This switches the internal configuration of one module and should not be confused with parallel operation of multiple modules.
    type: string
    enum:
      - Series
      - Parallel
      - Automatic
    default: Series
  discharge_gpio_chip:
    description: >-
      GPIO chip to use to switch external discharge load on and off. An empty string disables discharging.
      Note that the hardware load must be designed to allow permanent discharge from the highest voltage (e.g. 1000V)
    type: string
    default: ''
  discharge_gpio_line:
    description: GPIO line to use to switch discharge load
    type: integer
    default: 0
  discharge_gpio_polarity:
    description: GPIO polarity, false means active low, true means active high
    type: boolean
    default: true
  debug_print_all_telemetry:
    description: Read and print all telemetry from the power module. Helpful while debugging.
    type: boolean
    default: false
metadata:
  license: https://opensource.org/licenses/Apache-2.0
  authors:
    - aw@pionix.de