description: >-
  Errors for Connector Lock

  The following error types give more details about connector lock errors.
  You should consider setting a MREC_1_ConnectorLockFailure to indicate a generic lock failure with an MREC error code as well
  as one of the more detailed but custom error codes to specify the reason:

  All error codes that begin with MREC needs to be implemented to fulfill the Minimum Required Error Codes defined by the ChargeX consortium:

  https://inl.gov/content/uploads/2023/07/ChargeX_MREC_Rev5_09.12.23.pdf
errors:
  - name: ConnectorLockCapNotCharged
    description: The capacitor for connector lock motor failed to charge within expected time
  - name: ConnectorLockUnexpectedOpen
    description: The connector lock feedback returns open while it should be closed
  - name: ConnectorLockUnexpectedClose
    description: The connector lock feedback returns closed while it should be open
  - name: ConnectorLockFailedLock
    description: The connector lock failed to lock (feedback still returns open)
  - name: ConnectorLockFailedUnlock
    description: The connector lock failed to unlock (feedback still returns closed)
  - name: MREC1ConnectorLockFailure
    description: >-
      Failure to lock or unlock connector on the vehicle side as per MREC definition.
      How should that be implemented? We can only find out about locking on the EVSE side,
      so we will use this error to report EVSE side lock failures. It is probably a mistake in the MREC definition.
  - name: VendorError
    description: >-
      Vendor specific error code. Will stop charging session.
  - name: VendorWarning
    description: >-
      Vendor specific error code. Charging may continue.