Add extracted tools: CitrineOS, OpenOCPP, ShapeShifter

- CitrineOS core extracted (CSMS OCPP 2.0.1)
- OpenOCPP extracted (firmware OCPP 1.6J/2.0.1)
- ShapeShifter library installed (pip install -e)
- ShapeShifter specification extracted
- EVerest extracted

TODO updated with progress

tools/EVerest-main/modules/Misc/SerialCommHub/manifest.yaml

@@ -0,0 +1,71 @@
+description: Hub to communicate with attached serial devices
+provides:
+  main:
+    description: Implementation of serial communication hub
+    interface: serial_communication_hub
+    config:
+      serial_port:
+        description: Serial port the hardware is connected to
+        type: string
+        default: /dev/ttyUSB0
+      baudrate:
+        description: Baudrate
+        type: integer
+        minimum: 0
+        maximum: 230400
+        default: 9600
+      parity:
+        description: 'Parity bit: 0: None, 1: Odd, 2: Even'
+        type: integer
+        minimum: 0
+        maximum: 2
+        default: 0
+      rtscts:
+        description: Use RTS/CTS hardware flow control
+        type: boolean
+        default: false
+      ignore_echo:
+        description: On some hardware every message that is sent is read back, this setting filters the sent message in the reply.
+        type: boolean
+        default: false
+      rxtx_gpio_chip:
+        description: GPIO chip to use to switch between RX/TX. An empty string disables GPIO usage.
+        type: string
+        default: ''
+      rxtx_gpio_line:
+        description: GPIO line to use to switch between RX/TX
+        type: integer
+        default: 0
+      rxtx_gpio_tx_high:
+        description: GPIO direction, false means low for TX, true means high for TX
+        type: boolean
+        default: false
+      max_packet_size:
+        description: >-
+          Maximum size of a packet to read/write in bytes. Payload exceeding the size will be chunked.
+          The APU size according to [wikipedia](https://en.wikipedia.org/wiki/Modbus) is 256 bytes,
+          which is used as default here.
+        type: integer
+        # 7 is a minimum packet size to transfer a response
+        minimum: 7
+        maximum: 65536
+        default: 256
+      initial_timeout_ms:
+        description: Timeout in ms for the first packet.
+        type: integer
+        default: 500
+      within_message_timeout_ms:
+        description: Timeout in ms for subsequent packets.
+        type: integer
+        default: 100
+      retries:
+        description: Count of retries in case of error in Modbus query.
+        type: integer
+        minimum: 0
+        maximum: 10
+        default: 2
+metadata:
+  license: https://opensource.org/licenses/Apache-2.0
+  authors:
+    - Lars Dieckmann
+    - Cornelius Claussen