Add extracted tools: CitrineOS, OpenOCPP, ShapeShifter
- CitrineOS core extracted (CSMS OCPP 2.0.1) - OpenOCPP extracted (firmware OCPP 1.6J/2.0.1) - ShapeShifter library installed (pip install -e) - ShapeShifter specification extracted - EVerest extracted TODO updated with progress
This commit is contained in:
Eric F
@@ -0,0 +1,201 @@
|
||||
description: >-
|
||||
Driver for the Huawei FusionCharge V100R023C10 DC Power Unit.
|
||||
Currently the driver only supports a single connector per dispenser (per host).
|
||||
config:
|
||||
ethernet_interface:
|
||||
description: Ethernet interface name to use for communication with the power supply.
|
||||
type: string
|
||||
default: eth0
|
||||
psu_ip:
|
||||
description: IP address of the power supply.
|
||||
type: string
|
||||
default: "192.168.11.1"
|
||||
psu_port:
|
||||
description: Modbus port of the power supply.
|
||||
type: integer
|
||||
default: 502
|
||||
tls_enabled:
|
||||
description: |
|
||||
Enable TLS encryption for the connection to the power supply.
|
||||
If set to true, the psu_ca, the client_cert and client_key must be provided.
|
||||
type: boolean
|
||||
default: false
|
||||
psu_ca_cert:
|
||||
description: |
|
||||
Path to the CA certificate file for the power supply.
|
||||
If not provided, the connection will not be encrypted.
|
||||
type: string
|
||||
default: ""
|
||||
client_cert:
|
||||
description: |
|
||||
Path to the client certificate file for the power supply.
|
||||
If not provided, the connection will not be encrypted.
|
||||
type: string
|
||||
default: ""
|
||||
client_key:
|
||||
description: |
|
||||
Path to the client key file for the power supply.
|
||||
If not provided, the connection will not be encrypted.
|
||||
type: string
|
||||
default: ""
|
||||
module_placeholder_allocation_timeout_s:
|
||||
description: |
|
||||
Timeout in seconds for the allocation of a module placeholder.
|
||||
type: integer
|
||||
default: 5
|
||||
esn:
|
||||
description: |
|
||||
Electronic Serial Number of the dispenser.
|
||||
Required to identify the dispenser in case there are multiple dispensers.
|
||||
type: string
|
||||
default: "0000000000000000"
|
||||
HACK_publish_requested_voltage_current:
|
||||
description: |
|
||||
Just publish the requested voltage and current to the power supply.
|
||||
This is a hack useful for testing in a SIL environment.
|
||||
type: boolean
|
||||
default: false
|
||||
HACK_use_ovm_while_cable_check:
|
||||
description: |
|
||||
Use the over voltage monitor while the cable check is running instead of the powermeter, e.g. when the powermeter is too slow.
|
||||
type: boolean
|
||||
default: false
|
||||
send_secure_goose:
|
||||
description: |
|
||||
Send secure GOOSE frames to the power supply.
|
||||
If set to false, the GOOSE frames are sent without a signature. If set to true, the outgoing GOOSE frames are signed.
|
||||
Note: This does not affect receiving GOOSE frames.
|
||||
type: boolean
|
||||
default: true
|
||||
allow_insecure_goose:
|
||||
description: |
|
||||
Allow receiving insecure GOOSE frames from the power supply.
|
||||
If set to false, the received GOOSE frames must be signed (the signature is only checked if verify_secure_goose is set to true).
|
||||
If set to true, the received GOOSE frames are not checked for a signature.
|
||||
Note: If verify_secure_goose is set to true, this setting is ignored.
|
||||
type: boolean
|
||||
default: false
|
||||
verify_secure_goose:
|
||||
description: |
|
||||
Verify the received GOOSE frames.
|
||||
If set to false, the received GOOSE frames are not verified.
|
||||
If set to true, the received GOOSE frames must be secure and the signature must be valid.
|
||||
Note: If this is set to true the allow_insecure_goose setting is ignored
|
||||
type: boolean
|
||||
default: true
|
||||
upstream_voltage_source:
|
||||
description: |
|
||||
The PSU upstream voltage source to use
|
||||
type: string
|
||||
enum:
|
||||
- IMD
|
||||
- OVM
|
||||
default: IMD
|
||||
telemetry_topic_prefix:
|
||||
description: |
|
||||
MQTT Topic prefix for telemetry data published by this module. No trailing slash.
|
||||
Set to an empty string (default) to disable telemetry publishing.
|
||||
type: string
|
||||
default: ""
|
||||
provides:
|
||||
connector_1:
|
||||
description: Power supply interface for the first connector.
|
||||
interface: power_supply_DC
|
||||
config:
|
||||
global_connector_number:
|
||||
description: |
|
||||
Number of the connector.
|
||||
Required to identify the connector.
|
||||
type: integer
|
||||
max_export_current_A:
|
||||
description: >-
|
||||
Maximum current that the connector can deliver.
|
||||
type: number
|
||||
default: 0
|
||||
max_export_power_W:
|
||||
description: >-
|
||||
Maximum power that the connector can deliver.
|
||||
type: number
|
||||
default: 0
|
||||
connector_2:
|
||||
description: Power supply interface for the second connector.
|
||||
interface: power_supply_DC
|
||||
config:
|
||||
global_connector_number:
|
||||
description: |
|
||||
Number of the connector.
|
||||
Required to identify the connector.
|
||||
type: integer
|
||||
default: -1
|
||||
max_export_current_A:
|
||||
description: >-
|
||||
Maximum current that the connector can deliver.
|
||||
type: number
|
||||
default: 0
|
||||
max_export_power_W:
|
||||
description: >-
|
||||
Maximum power that the connector can deliver.
|
||||
type: number
|
||||
default: 0
|
||||
connector_3:
|
||||
description: Power supply interface for the third connector.
|
||||
interface: power_supply_DC
|
||||
config:
|
||||
global_connector_number:
|
||||
description: |
|
||||
Number of the connector.
|
||||
Required to identify the connector.
|
||||
type: integer
|
||||
default: -1
|
||||
max_export_current_A:
|
||||
description: >-
|
||||
Maximum current that the connector can deliver.
|
||||
type: number
|
||||
default: 0
|
||||
max_export_power_W:
|
||||
description: >-
|
||||
Maximum power that the connector can deliver.
|
||||
type: number
|
||||
default: 0
|
||||
connector_4:
|
||||
description: Power supply interface for the fourth connector.
|
||||
interface: power_supply_DC
|
||||
config:
|
||||
global_connector_number:
|
||||
description: |
|
||||
Number of the connector.
|
||||
Required to identify the connector.
|
||||
type: integer
|
||||
default: -1
|
||||
max_export_current_A:
|
||||
description: >-
|
||||
Maximum current that the connector can deliver.
|
||||
type: number
|
||||
default: 0
|
||||
max_export_power_W:
|
||||
description: >-
|
||||
Maximum power that the connector can deliver.
|
||||
type: number
|
||||
default: 0
|
||||
requires:
|
||||
board_support:
|
||||
interface: evse_board_support
|
||||
min_connections: 1
|
||||
max_connections: 4
|
||||
isolation_monitor:
|
||||
interface: isolation_monitor
|
||||
min_connections: 0
|
||||
max_connections: 4
|
||||
carside_powermeter:
|
||||
interface: powermeter
|
||||
min_connections: 0
|
||||
max_connections: 4
|
||||
over_voltage_monitor:
|
||||
interface: over_voltage_monitor
|
||||
min_connections: 0
|
||||
max_connections: 4
|
||||
enable_external_mqtt: true
|
||||
metadata:
|
||||
license: https://opensource.org/licenses/Apache-2.0
|
||||
authors:
|
||||
- Frickly Systems GmbH
|
||||
Reference in New Issue
Block a user