Add extracted tools: CitrineOS, OpenOCPP, ShapeShifter
- CitrineOS core extracted (CSMS OCPP 2.0.1) - OpenOCPP extracted (firmware OCPP 1.6J/2.0.1) - ShapeShifter library installed (pip install -e) - ShapeShifter specification extracted - EVerest extracted TODO updated with progress
This commit is contained in:
Eric F
@@ -0,0 +1,121 @@
|
||||
##############################################################################
|
||||
#
|
||||
# Note by PIONIX GmbH
|
||||
# ===================
|
||||
#
|
||||
# Original file distributed NXP
|
||||
#
|
||||
# Licensed under the Apache License, Version 2.0 (the "License");
|
||||
# you may not use this file except in compliance with the License.
|
||||
# You may obtain a copy of the License at
|
||||
#
|
||||
# http://www.apache.org/licenses/LICENSE-2.0
|
||||
#
|
||||
# Unless required by applicable law or agreed to in writing, software
|
||||
# distributed under the License is distributed on an "AS IS" BASIS,
|
||||
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
# See the License for the specific language governing permissions and
|
||||
# limitations under the License.
|
||||
#
|
||||
##############################################################################
|
||||
|
||||
########################### PN7160 libnfc-nci.conf ############################
|
||||
|
||||
###############################################################################
|
||||
# Application options
|
||||
APPL_TRACE_LEVEL=0xFF
|
||||
PROTOCOL_TRACE_LEVEL=0xFFFFFFFF
|
||||
|
||||
NFC_DEBUG_ENABLED=0x00
|
||||
|
||||
###############################################################################
|
||||
# File used for NFA storage
|
||||
NFA_STORAGE="/data/vendor/nfc"
|
||||
|
||||
###############################################################################
|
||||
# Forcing HOST to listen for a selected protocol
|
||||
# 0x00 : Disable Host Listen
|
||||
# 0x01 : Enable Host to Listen (A) for ISO-DEP tech A
|
||||
# 0x02 : Enable Host to Listen (B) for ISO-DEP tech B
|
||||
# 0x04 : Enable Host to Listen (F) for T3T Tag Type Protocol tech F
|
||||
# 0x07 : Enable Host to Listen (ABF)for ISO-DEP tech AB & T3T Tag Type Protocol tech F
|
||||
HOST_LISTEN_TECH_MASK=0x07
|
||||
|
||||
###############################################################################
|
||||
# When screen is turned off, specify the desired power state of the controller.
|
||||
# 0: power-off-sleep state; DEFAULT
|
||||
# 1: full-power state
|
||||
# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used)
|
||||
SCREEN_OFF_POWER_STATE=1
|
||||
|
||||
###############################################################################
|
||||
# NCI Hal Module name
|
||||
NCI_HAL_MODULE="nfc_nci.pn54x"
|
||||
|
||||
###############################################################################
|
||||
# Force tag polling for the following technology(s).
|
||||
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
|
||||
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B |
|
||||
# NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 |
|
||||
# NFA_TECHNOLOGY_MASK_KOVIO | NFA_TECHNOLOGY_MASK_A_ACTIVE |
|
||||
# NFA_TECHNOLOGY_MASK_F_ACTIVE
|
||||
#
|
||||
# Notable bits:
|
||||
# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */
|
||||
# NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */
|
||||
# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */
|
||||
# NFA_TECHNOLOGY_MASK_ISO15693 0x08 /* Proprietary Technology */
|
||||
# NFA_TECHNOLOGY_MASK_KOVIO 0x20 /* Proprietary Technology */
|
||||
# NFA_TECHNOLOGY_MASK_A_ACTIVE 0x40 /* NFC Technology A active mode */
|
||||
# NFA_TECHNOLOGY_MASK_F_ACTIVE 0x80 /* NFC Technology F active mode */
|
||||
# This flag when set to zero will disable Reader mode.
|
||||
POLLING_TECH_MASK=0xCF
|
||||
|
||||
###############################################################################
|
||||
# Force P2P to only listen for the following technology(s).
|
||||
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
|
||||
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F |
|
||||
# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE
|
||||
#
|
||||
# Notable bits:
|
||||
# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */
|
||||
# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */
|
||||
# NFA_TECHNOLOGY_MASK_A_ACTIVE 0x40 /* NFC Technology A active mode */
|
||||
# NFA_TECHNOLOGY_MASK_F_ACTIVE 0x80 /* NFC Technology F active mode */
|
||||
# This flag when set to zero will disable P2P Listen mode.
|
||||
P2P_LISTEN_TECH_MASK=0xC5
|
||||
|
||||
PRESERVE_STORAGE=0x01
|
||||
|
||||
###############################################################################
|
||||
# AID_MATCHING constants
|
||||
# AID_MATCHING_EXACT_ONLY 0x00
|
||||
# AID_MATCHING_EXACT_OR_PREFIX 0x01
|
||||
# AID_MATCHING_PREFIX_ONLY 0x02
|
||||
# AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03
|
||||
AID_MATCHING_MODE=0x03
|
||||
|
||||
###############################################################################
|
||||
# Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h.
|
||||
# Maximum EE supported number
|
||||
NFA_MAX_EE_SUPPORTED=0x01
|
||||
|
||||
###############################################################################
|
||||
#Set the OffHost AID supported power state:
|
||||
OFFHOST_AID_ROUTE_PWR_STATE=0x3B
|
||||
|
||||
###############################################################################
|
||||
# Vendor Specific Proprietary Protocol & Discovery Configuration
|
||||
# Set to 0xFF if unsupported
|
||||
# byte[0] NCI_PROTOCOL_18092_ACTIVE
|
||||
# byte[1] NCI_PROTOCOL_B_PRIME
|
||||
# byte[2] NCI_PROTOCOL_DUAL
|
||||
# byte[3] NCI_PROTOCOL_15693
|
||||
# byte[4] NCI_PROTOCOL_KOVIO
|
||||
# byte[5] NCI_PROTOCOL_MIFARE
|
||||
# byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO
|
||||
# byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME
|
||||
# byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME
|
||||
NFA_PROPRIETARY_CFG={05:FF:FF:06:81:80:70:FF:FF}
|
||||
|
||||
###############################################################################
|
||||
@@ -0,0 +1,221 @@
|
||||
##############################################################################
|
||||
#
|
||||
# Note by PIONIX GmbH
|
||||
# ===================
|
||||
#
|
||||
# Original file distributed NXP
|
||||
#
|
||||
# Licensed under the Apache License, Version 2.0 (the "License");
|
||||
# you may not use this file except in compliance with the License.
|
||||
# You may obtain a copy of the License at
|
||||
#
|
||||
# http://www.apache.org/licenses/LICENSE-2.0
|
||||
#
|
||||
# Unless required by applicable law or agreed to in writing, software
|
||||
# distributed under the License is distributed on an "AS IS" BASIS,
|
||||
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
# See the License for the specific language governing permissions and
|
||||
# limitations under the License.
|
||||
#
|
||||
# --------------------------------------------------------
|
||||
# This file has been changed by PIONIX GmbH in 11-2024
|
||||
# Changes are marked below
|
||||
# --------------------------------------------------------
|
||||
#
|
||||
##############################################################################
|
||||
|
||||
########################### PN7160 libnfc-nxp.conf ############################
|
||||
|
||||
###############################################################################
|
||||
# Logging Levels. Suggested value for debugging is 0x03.
|
||||
# NXPLOG_GLOBAL_LOGLEVEL - Configuration for Global logging level
|
||||
# NXPLOG_EXTNS_LOGLEVEL - Configuration for extns logging level
|
||||
# NXPLOG_NCIHAL_LOGLEVEL - Configuration for enabling logging of HAL
|
||||
# NXPLOG_NCIX_LOGLEVEL - Configuration for enabling logging of NCI TX packets
|
||||
# NXPLOG_NCIR_LOGLEVEL - Configuration for enabling logging of NCI RX packets
|
||||
# NXPLOG_FWDNLD_LOGLEVEL - Configuration for enabling logging of FW download functionality
|
||||
# NXPLOG_TML_LOGLEVEL - Configuration for enabling logging of TML
|
||||
# Logging Levels
|
||||
# NXPLOG_DEFAULT_LOGLEVEL 0x01
|
||||
# NXPLOG_DEBUG_LOGLEVEL 0x03
|
||||
# NXPLOG_WARN_LOGLEVEL 0x02
|
||||
# NXPLOG_ERROR_LOGLEVEL 0x01
|
||||
# NXPLOG_SILENT_LOGLEVEL 0x00
|
||||
NXPLOG_EXTNS_LOGLEVEL=0x00
|
||||
NXPLOG_NCIHAL_LOGLEVEL=0x00
|
||||
NXPLOG_NCIX_LOGLEVEL=0x00
|
||||
NXPLOG_NCIR_LOGLEVEL=0x00
|
||||
NXPLOG_FWDNLD_LOGLEVEL=0x00
|
||||
NXPLOG_TML_LOGLEVEL=0x00
|
||||
###############################################################################
|
||||
# TRANSPORT Type
|
||||
# 0x00 - I2C /SPI for noraml nxpnfc driver
|
||||
# 0x01 - Not Used, kept to align with Android code
|
||||
# 0x02 - ALT_I2C
|
||||
# 0x03 - ALT_SPI
|
||||
NXP_TRANSPORT=0x02
|
||||
|
||||
###############################################################################
|
||||
# Nfc Device Node name
|
||||
NXP_NFC_DEV_NODE="/dev/nxpnfc"
|
||||
|
||||
# Modification by PIONIX GmbH 2024 vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
|
||||
|
||||
###############################################################################
|
||||
# ALT_I2C/SPI Interface Configuration
|
||||
# [PINs defined as GPIO23/24/25 on RPi5]
|
||||
PIN_INT=594
|
||||
PIN_ENABLE=595
|
||||
PIN_FWDNLD=596
|
||||
|
||||
I2C_ADDRESS=0x28
|
||||
I2C_BUS="/dev/i2c-1"
|
||||
SPI_BUS="/dev/spidev0.0"
|
||||
# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
###############################################################################
|
||||
# Extension for Mifare reader enable
|
||||
MIFARE_READER_ENABLE=0x01
|
||||
|
||||
###############################################################################
|
||||
# Firmware file type
|
||||
#.so file 0x01
|
||||
#.bin file 0x02
|
||||
NXP_FW_TYPE=0x01
|
||||
|
||||
###############################################################################
|
||||
# System clock source selection configuration
|
||||
#define CLK_SRC_XTAL 1
|
||||
#define CLK_SRC_PLL 2
|
||||
NXP_SYS_CLK_SRC_SEL=0x01
|
||||
|
||||
###############################################################################
|
||||
# Dynamic RSSI feature enable
|
||||
# Disable 0x00
|
||||
# Enable 0x01
|
||||
NXP_AGC_DEBUG_ENABLE=0x00
|
||||
|
||||
###############################################################################
|
||||
# NXP proprietary settings
|
||||
NXP_ACT_PROP_EXTN={2F, 02, 00}
|
||||
|
||||
###############################################################################
|
||||
# NFC forum profile settings
|
||||
NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00}
|
||||
|
||||
|
||||
###############################################################################
|
||||
# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set
|
||||
# to 0x00
|
||||
NXP_I2C_FRAGMENTATION_ENABLED=0x00
|
||||
|
||||
###############################################################################
|
||||
# System clock frequency selection configuration
|
||||
#define CLK_FREQ_13MHZ 1
|
||||
#define CLK_FREQ_19_2MHZ 2
|
||||
#define CLK_FREQ_24MHZ 3
|
||||
#define CLK_FREQ_26MHZ 4
|
||||
#define CLK_FREQ_38_4MHZ 5
|
||||
#define CLK_FREQ_52MHZ 6
|
||||
NXP_SYS_CLK_FREQ_SEL=0x02
|
||||
|
||||
###############################################################################
|
||||
# The timeout value to be used for clock request acknowledgment
|
||||
# min value = 0x01 to max = 0x06
|
||||
NXP_SYS_CLOCK_TO_CFG=0x06
|
||||
|
||||
###############################################################################
|
||||
# TVDD configurations settings
|
||||
# Allow NFCC to configure External TVDD
|
||||
# There are two possible configurations (0x01 or 0x02):
|
||||
# CFG1: Vbat is used to generate the VDD(TX) through TXLDO
|
||||
# CFG2: external 5V is used to generate the VDD(TX) through TXLDO
|
||||
NXP_EXT_TVDD_CFG=0x02
|
||||
|
||||
# CFG1: 3.3V for both Reader and Card modes
|
||||
NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01, 00, D0, 0C}
|
||||
|
||||
# CFG2: VBAT2 to 5V and 4.7V for both Reader and Card modes
|
||||
NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, B2, 1E, 1F, 00, D0, 0C}
|
||||
|
||||
###############################################################################
|
||||
# Core configuration settings
|
||||
NXP_CORE_CONF={ 20, 02, 31, 0F,
|
||||
85, 01, 01,
|
||||
28, 01, 00,
|
||||
21, 01, 00,
|
||||
30, 01, 08,
|
||||
31, 01, 03,
|
||||
32, 01, 60,
|
||||
38, 01, 01,
|
||||
33, 04, 01, 02, 03, 04,
|
||||
54, 01, 06,
|
||||
50, 01, 02,
|
||||
5B, 01, 00,
|
||||
80, 01, 01,
|
||||
81, 01, 01,
|
||||
82, 01, 0E,
|
||||
18, 01, 01
|
||||
}
|
||||
|
||||
###############################################################################
|
||||
# NXP Proprietary core configuration extensions
|
||||
# For more details refer to the NFC Controller User Manual
|
||||
NXP_CORE_CONF_EXTN={20, 02, 09, 02,
|
||||
A0, 5E, 01, 01,
|
||||
A0, 40, 01, 00
|
||||
}
|
||||
|
||||
###############################################################################
|
||||
# RF configuration settings
|
||||
# Below settings relates to OM5578 demo kit RF performance optimization
|
||||
#NXP_RF_CONF_BLK_1={ 20, 02, A3, 13,
|
||||
# A0, 0D, 06, 04, 35, 90, 01, F4, 01,
|
||||
# A0, 0D, 06, 06, 44, 01, 90, 03, 00,
|
||||
# A0, 0D, 06, 06, 30, B0, 01, 10, 00,
|
||||
# A0, 0D, 06, 06, 42, 02, 00, FF, FF,
|
||||
# A0, 0D, 03, 06, 3F, 04,
|
||||
# A0, 0D, 06, 20, 42, 88, 00, FF, FF,
|
||||
# A0, 0D, 04, 22, 44, 22, 00,
|
||||
# A0, 0D, 06, 22, 2D, 50, 34, 0C, 00,
|
||||
# A0, 0D, 06, 32, 42, F8, 00, FF, FF,
|
||||
# A0, 0D, 06, 34, 2D, 24, 37, 0C, 00,
|
||||
# A0, 0D, 06, 34, 33, 86, 80, 00, 70,
|
||||
# A0, 0D, 04, 34, 44, 22, 00,
|
||||
# A0, 0D, 06, 42, 2D, 15, 45, 0D, 00,
|
||||
# A0, 0D, 04, 46, 44, 22, 00,
|
||||
# A0, 0D, 06, 46, 2D, 05, 59, 0E, 00,
|
||||
# A0, 0D, 06, 44, 42, 88, 00, FF, FF,
|
||||
# A0, 0D, 06, 56, 2D, 05, 9F, 0C, 00,
|
||||
# A0, 0D, 06, 54, 42, 88, 00, FF, FF,
|
||||
# A0, 0D, 06, 0A, 33, 80, 86, 00, 70
|
||||
#}
|
||||
|
||||
###############################################################################
|
||||
# Extended APDU length for ISO_DEP
|
||||
ISO_DEP_MAX_TRANSCEIVE=0xFEFF
|
||||
|
||||
###############################################################################
|
||||
# Choose the presence-check algorithm for type-4 tag. If not defined, the default value is 1.
|
||||
# 0 NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm
|
||||
# 1 NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block
|
||||
# 2 NFA_RW_PRES_CHK_ISO_DEP_NAK; ISO-DEP protocol's nak presence check command
|
||||
PRESENCE_CHECK_ALGORITHM=2
|
||||
|
||||
###############################################################################
|
||||
#T4T NFCEE ENABLE
|
||||
#bit pos 0 = Enable T4T NFCEE from NFCC (Only wired R/W activated, RF read only activated)
|
||||
NXP_T4T_NFCEE_ENABLE=0x01
|
||||
|
||||
###############################################################################
|
||||
#Set the T4TNfcee AID Power state :
|
||||
#This settings will be used when application does not set this parameter
|
||||
# bit pos 0 = Switch On
|
||||
# bit pos 1 = Switch Off
|
||||
# bit pos 2 = Battery Off
|
||||
# bit pos 3 = Screen off unlock
|
||||
# bit pos 4 = Screen On lock
|
||||
# bit pos 5 = Screen Off lock
|
||||
DEFAULT_T4TNFCEE_AID_POWER_STATE=0x3B
|
||||
|
||||
###############################################################################
|
||||
Reference in New Issue
Block a user