Add extracted tools: CitrineOS, OpenOCPP, ShapeShifter

- CitrineOS core extracted (CSMS OCPP 2.0.1)
- OpenOCPP extracted (firmware OCPP 1.6J/2.0.1)
- ShapeShifter library installed (pip install -e)
- ShapeShifter specification extracted
- EVerest extracted

TODO updated with progress

tools/EVerest-main/modules/HardwareDrivers/IsolationMonitors/DoldRN5893/main/registers.hpp

@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: Apache-2.0
+// Copyright Frickly Systems GmbH
+// Copyright Pionix GmbH and Contributors to EVerest
+
+#pragma once
+
+#include <cstdint>
+#include <string>
+
+enum class DeviceFault_30001 : std::uint16_t {
+    /// 0: No failure
+    NoFailure = 0,
+    /// 1: Broken wire detection L(+)/L(-)
+    BrokenWire_L_PosNeg = 1,
+    /// 2: Broken wire detection PE1/PE2
+    BrokenWire_PE1_PE2 = 2,
+    /// 3: Internal failure detected in test mode (Int. 1)
+    InternalFailure_TestMode_Int1 = 3,
+    /// 4: Parameter failures (Incorrect potentiometer settings on the device)
+    ParameterFailure_PotentiometerSetting = 4,
+    /// 9: Communication fault Modbus
+    CommunicationFault_Modbus = 9,
+    /// 10: Checksum failure EEPROM (Int. 2)
+    ChecksumFailure_EEPROM_Int2 = 10,
+    /// 11: Internal communication fault (Int. 3)
+    InternalCommunicationFault_Int3 = 11,
+    /// 12: Internal error 4 (Int. 4)
+    InternalError_Int4 = 12
+};
+
+std::string_view to_string(DeviceFault_30001 code) noexcept;
+
+enum class DeviceState_30002 : std::uint8_t {
+    /// 0: Device initializing
+    Initializing = 0,
+    /// 1: Device is ready and in measuring mode, no response value is exceeded
+    Measuring = 1,
+    /// 2: Device in error mode
+    ErrorMode = 2,
+    /// 3: Device in selftesting
+    SelfTesting = 3,
+    /// 4: Device in advanced test
+    AdvancedTest = 4,
+    /// 5: Measuring function stopped
+    MeasuringStopped = 5,
+    /// 6: Device in measuring mode, response value alarm is exceeded
+    Measuring_AlarmExceeded = 6,
+    /// 7: Device in measuring mode, response value pre-alarm is exceeded
+    Measuring_PreAlarmExceeded = 7
+};
+
+std::string_view to_string(DeviceState_30002 state) noexcept;
+
+/**
+ * @brief convert a insulation resistance (registers 32001 and 32004) to kOhm
+ * @note according to datasheet, the value 0xFFFF means > 2MOhm
+ */
+uint32_t insulation_resistance_to_ohm(uint16_t insulation_resistance_100ohm) noexcept;