Add extracted tools: CitrineOS, OpenOCPP, ShapeShifter
- CitrineOS core extracted (CSMS OCPP 2.0.1) - OpenOCPP extracted (firmware OCPP 1.6J/2.0.1) - ShapeShifter library installed (pip install -e) - ShapeShifter specification extracted - EVerest extracted TODO updated with progress
This commit is contained in:
Eric F
@@ -0,0 +1,307 @@
|
||||
// SPDX-License-Identifier: Apache-2.0
|
||||
// Copyright Pionix GmbH and Contributors to EVerest
|
||||
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
|
||||
#include "evSerial.h"
|
||||
#include <unistd.h>
|
||||
|
||||
#include "phyverso.pb.h"
|
||||
#include <sigslot/signal.hpp>
|
||||
|
||||
std::atomic_bool sw_version_received = false;
|
||||
|
||||
void help() {
|
||||
printf("\nUsage: ./phyverso_cli /dev/ttyXXX /path/to/config.json\n\n");
|
||||
}
|
||||
|
||||
int main(int argc, char* argv[]) {
|
||||
int selected_connector = 1;
|
||||
|
||||
printf("-- Phyverso CLI tool --\n");
|
||||
|
||||
printf("Use the following keys to send packets:\n");
|
||||
printf("A or a: set AC coil on or off\n");
|
||||
printf("D or d: set (monitored) DC coil on or off\n");
|
||||
printf("O or o: set (unmonitored) AUX1 DC coil on or off\n");
|
||||
printf("P or p: set (unmonitored) AUX2 DC coil on or off\n");
|
||||
printf("L or l: motorlock lock or unlock\n");
|
||||
printf("R or r: hard or soft reset\n");
|
||||
printf("V: send keep alive/get version\n");
|
||||
printf("K: trigger RCD TEST on selected connector\n");
|
||||
printf("k: reset RCD on selected connector\n\n");
|
||||
|
||||
printf("1: use connector 1\n");
|
||||
printf("2: use connector 2\n\n");
|
||||
|
||||
printf("0: PWM F (0%% DC, -12V)\n");
|
||||
printf("5: PWM 5%%\n");
|
||||
printf("6: PWM 10%%\n");
|
||||
printf("7: PWM 80%%\n");
|
||||
printf("8: PWM 97%%\n");
|
||||
printf("9: PWM X1 (100%%)\n");
|
||||
printf("9: PWM X1 (100%%)\n");
|
||||
|
||||
printf("U or u: Fan1 50%% or OFF (if your fan supports 0%% duty cycle)\n");
|
||||
printf("I or i: Fan2 ON or 20%%\n");
|
||||
|
||||
if (argc != 3) {
|
||||
help();
|
||||
exit(0);
|
||||
}
|
||||
const char* device = argv[1];
|
||||
const char* config_path = argv[2];
|
||||
|
||||
evConfig verso_config;
|
||||
|
||||
// with config rework we still have to go the json route here
|
||||
if (!verso_config.open_file(config_path)) {
|
||||
printf("Could not open config file \"%s\"\n", config_path);
|
||||
return -1;
|
||||
}
|
||||
|
||||
verso_config.json_conf_to_evConfig();
|
||||
|
||||
evSerial p(verso_config);
|
||||
|
||||
if (!p.open_device(device, 115200)) {
|
||||
printf("Cannot open device \"%s\"\n", device);
|
||||
} else {
|
||||
p.run();
|
||||
|
||||
p.signal_config_request.connect([&]() {
|
||||
printf("Received config request\n");
|
||||
p.send_config();
|
||||
printf("Sent config packet\n");
|
||||
});
|
||||
|
||||
p.signal_keep_alive.connect([](KeepAlive s) {
|
||||
printf(">> KeepAlive: phyverso MCU SW Version: %s, Hardware %i/rev %i, MCU Timestamp %i\n",
|
||||
s.sw_version_string, s.hw_type, s.hw_revision, s.time_stamp);
|
||||
sw_version_received = true;
|
||||
});
|
||||
|
||||
p.signal_set_coil_state_response.connect([](int connector, CoilState s) {
|
||||
if (s.coil_state)
|
||||
printf(">> Connector %i, Coil %d: Relais CLOSED\n", connector, s.coil_type);
|
||||
else
|
||||
printf(">> Connector %i, Coil %d: Relais OPEN\n", connector, s.coil_type);
|
||||
});
|
||||
|
||||
p.signal_telemetry.connect([](int connector, Telemetry t) {
|
||||
printf(">> Connector %i: CP Voltage %i %i\n", connector, t.cp_voltage_hi, t.cp_voltage_lo);
|
||||
});
|
||||
|
||||
p.signal_cp_state.connect([](int connector, CpState s) {
|
||||
switch (s) {
|
||||
case CpState_STATE_A:
|
||||
printf(">> Connector %i: CP state A\n", connector);
|
||||
break;
|
||||
case CpState_STATE_B:
|
||||
printf(">> Connector %i: CP state B\n", connector);
|
||||
break;
|
||||
case CpState_STATE_C:
|
||||
printf(">> Connector %i: CP state C\n", connector);
|
||||
break;
|
||||
case CpState_STATE_D:
|
||||
printf(">> Connector %i: CP state D\n", connector);
|
||||
break;
|
||||
case CpState_STATE_E:
|
||||
printf(">> Connector %i: CP state E\n", connector);
|
||||
break;
|
||||
case CpState_STATE_F:
|
||||
printf(">> Connector %i: CP state F\n", connector);
|
||||
break;
|
||||
}
|
||||
});
|
||||
|
||||
p.signal_pp_state.connect([](int connector, PpState s) {
|
||||
switch (s) {
|
||||
case PpState_STATE_NC:
|
||||
printf(">> Connector %i: PP state NC\n", connector);
|
||||
break;
|
||||
case PpState_STATE_13A:
|
||||
printf(">> Connector %i: PP state 13A\n", connector);
|
||||
break;
|
||||
case PpState_STATE_20A:
|
||||
printf(">> Connector %i: PP state 20A\n", connector);
|
||||
break;
|
||||
case PpState_STATE_32A:
|
||||
printf(">> Connector %i: PP state 32A\n", connector);
|
||||
break;
|
||||
case PpState_STATE_70A:
|
||||
printf(">> Connector %i: PP state 70A\n", connector);
|
||||
break;
|
||||
case PpState_STATE_FAULT:
|
||||
printf(">> Connector %i: PP state FAULT\n", connector);
|
||||
break;
|
||||
}
|
||||
});
|
||||
|
||||
p.signal_fan_state.connect([](FanState s) {
|
||||
printf(">> Fan %i: EN=%s, Duty=%d RPM=%d\n", s.fan_id, (s.enabled ? "ON" : "OFF"), s.duty, s.rpm);
|
||||
});
|
||||
|
||||
p.signal_lock_state.connect([](int connector, LockState s) {
|
||||
switch (s) {
|
||||
case LockState_UNDEFINED:
|
||||
printf(">> Connector %i: Lock State UNDEFINED\n", connector);
|
||||
break;
|
||||
case LockState_LOCKED:
|
||||
printf(">> Connector %i: Lock State Locked\n", connector);
|
||||
break;
|
||||
case LockState_UNLOCKED:
|
||||
printf(">> Connector %i: Lock State Unlocked\n", connector);
|
||||
break;
|
||||
case LockState_LOCKING:
|
||||
printf(">> Connector %i: Lock State Locking\n", connector);
|
||||
break;
|
||||
case LockState_UNLOCKING:
|
||||
printf(">> Connector %i: Lock State Unlocking\n", connector);
|
||||
break;
|
||||
}
|
||||
});
|
||||
|
||||
p.signal_error_flags.connect([](int connector, ErrorFlags error_flags) {
|
||||
printf("------------\nError flags Connector %d:\n", connector);
|
||||
printf("\tdiode_fault: %d\n", error_flags.diode_fault);
|
||||
printf("\trcd_selftest_failed: %d\n", error_flags.rcd_selftest_failed);
|
||||
printf("\trcd_triggered: %d\n", error_flags.rcd_triggered);
|
||||
printf("\tventilation_not_available: %d\n", error_flags.ventilation_not_available);
|
||||
printf("\tconnector_lock_failed: %d\n", error_flags.connector_lock_failed);
|
||||
printf("\tcp_signal_fault: %d\n", error_flags.cp_signal_fault);
|
||||
printf("\theartbeat_timeout: %d\n", error_flags.heartbeat_timeout);
|
||||
printf("\tcoil_feedback_diverges_ac: %d\n", error_flags.coil_feedback_diverges);
|
||||
printf("\tpp_signal_fault: %d\n", error_flags.pp_signal_fault);
|
||||
printf("------------\n");
|
||||
});
|
||||
|
||||
while (true) {
|
||||
char c = getc(stdin);
|
||||
switch (c) {
|
||||
/* AC coils*/
|
||||
case 'A':
|
||||
printf("Setting AC coil to ON\n");
|
||||
p.set_coil_state_request(selected_connector, CoilType_COIL_AC, true);
|
||||
break;
|
||||
case 'a':
|
||||
printf("Setting AC coil to OFF\n");
|
||||
p.set_coil_state_request(selected_connector, CoilType_COIL_AC, false);
|
||||
break;
|
||||
/* DC coils */
|
||||
case 'D':
|
||||
printf("Setting monitored DC coil to ON\n");
|
||||
p.set_coil_state_request(selected_connector, CoilType_COIL_DC1, true);
|
||||
break;
|
||||
case 'd':
|
||||
printf("Setting monitored DC coil to OFF\n");
|
||||
p.set_coil_state_request(selected_connector, CoilType_COIL_DC1, false);
|
||||
break;
|
||||
case 'O':
|
||||
printf("Setting AUX1 DC coil to ON\n");
|
||||
p.set_coil_state_request(selected_connector, CoilType_COIL_DC2, true);
|
||||
break;
|
||||
case 'o':
|
||||
printf("Setting AUX1 DC coil to OFF\n");
|
||||
p.set_coil_state_request(selected_connector, CoilType_COIL_DC2, false);
|
||||
break;
|
||||
case 'P':
|
||||
printf("Setting AUX2 DC coil to ON\n");
|
||||
p.set_coil_state_request(selected_connector, CoilType_COIL_DC3, true);
|
||||
break;
|
||||
case 'p':
|
||||
printf("Setting AUX2 DC coil to OFF\n");
|
||||
p.set_coil_state_request(selected_connector, CoilType_COIL_DC3, false);
|
||||
break;
|
||||
/* Motor lock */
|
||||
case 'L':
|
||||
printf("Locking connector\n");
|
||||
p.lock(selected_connector, true);
|
||||
break;
|
||||
case 'l':
|
||||
printf("Unlocking connector\n");
|
||||
p.lock(selected_connector, false);
|
||||
break;
|
||||
/* Resets */
|
||||
case 'r':
|
||||
printf("Soft reset\n");
|
||||
p.reset(-1);
|
||||
break;
|
||||
case 'R':
|
||||
printf("Hard reset\n");
|
||||
p.reset(1);
|
||||
break;
|
||||
/* Versions/timestamp */
|
||||
case 'V':
|
||||
printf("Sending keep alive\n");
|
||||
p.keep_alive();
|
||||
break;
|
||||
/* Charging connector selection */
|
||||
case '1':
|
||||
printf("Connector 1 selected.\n");
|
||||
selected_connector = 1;
|
||||
break;
|
||||
case '2':
|
||||
printf("Connector 2 selected.\n");
|
||||
selected_connector = 2;
|
||||
break;
|
||||
/* CP PWM setting */
|
||||
case '0':
|
||||
printf("Set 0%% PWM\n");
|
||||
p.set_pwm(selected_connector, 0);
|
||||
break;
|
||||
case '5':
|
||||
printf("Set 5%% PWM\n");
|
||||
p.set_pwm(selected_connector, 500);
|
||||
break;
|
||||
case '6':
|
||||
printf("Set 10%% PWM\n");
|
||||
p.set_pwm(selected_connector, 1000);
|
||||
break;
|
||||
case '7':
|
||||
printf("Set 80%% PWM\n");
|
||||
p.set_pwm(selected_connector, 8000);
|
||||
break;
|
||||
case '8':
|
||||
printf("Set 97%% PWM\n");
|
||||
p.set_pwm(selected_connector, 9700);
|
||||
break;
|
||||
case '9':
|
||||
printf("Set 100%% PWM\n");
|
||||
p.set_pwm(selected_connector, 10000);
|
||||
break;
|
||||
/* Fans */
|
||||
case 'U':
|
||||
printf("Set fan1 to 50%%\n");
|
||||
p.set_fan_state(0, true, 500);
|
||||
break;
|
||||
case 'u':
|
||||
printf("Set fan1 to OFF\n");
|
||||
p.set_fan_state(0, false, 500); // example for setting fan off via enable param
|
||||
// check if your fan supports full OFF on PWM 0% duty (also check PWM on oscilloscope)
|
||||
// some PWM fans wont turn fully off without switching 12V supply
|
||||
break;
|
||||
case 'I':
|
||||
printf("Set fan2 to ON\n");
|
||||
p.set_fan_state(1, true, 1000);
|
||||
break;
|
||||
case 'i':
|
||||
printf("Set fan2 to 20%%\n");
|
||||
p.set_fan_state(1, true, 200);
|
||||
break;
|
||||
/* RCD */
|
||||
case 'K':
|
||||
printf("Sending RCD Test on connector %d\n", selected_connector);
|
||||
p.set_rcd_test(selected_connector, true);
|
||||
break;
|
||||
case 'k':
|
||||
printf("Resetting RCD on connector %d\n", selected_connector);
|
||||
p.reset_rcd(selected_connector, true);
|
||||
break;
|
||||
}
|
||||
std::this_thread::sleep_for(std::chrono::milliseconds(1));
|
||||
}
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
Reference in New Issue
Block a user