Add extracted tools: CitrineOS, OpenOCPP, ShapeShifter

- CitrineOS core extracted (CSMS OCPP 2.0.1)
- OpenOCPP extracted (firmware OCPP 1.6J/2.0.1)
- ShapeShifter library installed (pip install -e)
- ShapeShifter specification extracted
- EVerest extracted

TODO updated with progress

tools/EVerest-main/modules/EVSE/EvseSecurity/docs/index.rst

@@ -0,0 +1,126 @@
+.. _everest_modules_handwritten_EvseSecurity:
+
+.. ============
+.. EvseSecurity
+.. ============
+
+This module implements the
+:ref:`evse_security interface <everest_interfaces_evse_security>`.
+It wraps the functionality of the
+`libevse-security <https://github.com/EVerest/libevse-security>`_
+to provide access to security-related operations to other Everest modules such
+as OCPP and ISO15118. These modules require similar security-related
+operations and shared access to certificates and keys, which this module
+facilitates.
+
+For detailed information about the provided functionality, please refer to the
+README within the
+`libevse-security <https://github.com/EVerest/libevse-security>`_.
+
+CA Certificate Domains
+======================
+
+The combination of ISO 15118 and OCPP defines several CA certificate domains
+for charging stations, addressed and covered by this module:
+
+* V2G root: Trust anchor for ISO 15118 TLS communication between the charging
+  station and the electric vehicle.
+* CSMS root: Trust anchor for TLS communication between the charging station
+  and OCPP CSMS.
+* MF root: Trust anchor of the manufacturer to verify firmware updates.
+* MO root: Trust anchor of the Mobility Operator domain to verify contract
+  certificates.
+
+Module Configuration
+====================
+
+The following instructions describe how to configure the module parameters
+mainly for two domains: OCPP communication and ISO 15118 communication.
+
+A lot of configuration parameters specify directory or file paths from which
+certificates and private keys are loaded or new certificates and keys are
+written to. Please make sure that these paths are writeable for EVerest.
+
+Configuration for OCPP
+----------------------
+
+In OCPP and OCPP security profiles, the security level of the connection is
+specified as follows:
+
+* SecurityProfile 0: Unsecured transport without basic authentication
+* SecurityProfile 1: Unsecured transport with basic authentication
+* SecurityProfile 2: TLS with basic authentication
+* SecurityProfile 3: TLS with client-side certificates
+
+Only when security profiles 2 or 3 are used, the configuration of this module
+is relevant for the OCPP communication. In this case, the charging station
+acts as a TLS client.
+
+The ``csms_ca_bundle`` config parameter specifies a path to a file containing
+trusted CSMS root certificates. The server certificate presented by the CSMS
+server during the TLS handshake must be signed by one of the trusted root
+certificates specified in this file. 
+
+If new root certificates are installed using the ``install_ca_certificate``
+command with the CSMS domain specified, the new CA certificate is installed
+into the specified bundle and used for further validations.
+
+Note: The OCPP modules in EVerest can be configured to also trust the
+operating system's default verify paths. The parameter controlling this
+behavior is ``UseSslDefaultVerifyPaths``. If configured to ``true``, the
+``csms_ca_bundle`` need not necessarily be configured.
+
+If security profile 3 is used, a mutual TLS (mTLS) connection shall be
+established, so the CSMS server also verifies the client certificate. The
+``csms_leaf_cert_directory`` and ``csms_leaf_key_directory`` need to be
+configured for this. These parameters specify the directory of the client
+certificate and key for the mTLS connection.
+
+New CSMS client certificates can be installed using the
+``update_leaf_certificate`` command with the CSMS domain specified. In OCPP,
+new client certificates are installed by using the ``CertificateSigned.req``
+message.
+
+Configuration for ISO 15118
+---------------------------
+
+For ISO 15118 communication, the charging station provides a server endpoint
+to which the electric vehicle connects. The communication may be secured using
+TLS. TLS is mandatory for Plug&Charge. If TLS is used, the correct
+configuration of the ``secc_leaf_cert_directory`` and
+``secc_leaf_key_directory`` is required. These directories are used to locate
+the server certificate and key for the ISO 15118 TLS server provided by the
+charging station.
+
+New V2G client certificates can be installed using the
+``update_leaf_certificate`` command with the V2G domain specified. In OCPP,
+new client certificates are installed by using the ``CertificateSigned.req``
+message.
+
+Private Key Password
+--------------------
+
+If private keys are generated in the process of generating a certificate
+signing request (CSR), the private keys are not encrypted with a password.
+Therefore, no password needs to be configured if all certificates are
+installed using the ``generate_certificate_signing_request`` and
+``update_leaf_certificate`` commands.
+
+If existing certificates and private keys are to be installed, the
+``private_key_password`` parameter specifies the password for encrypted
+private keys. Please note that only one value can be configured for possibly
+multiple encrypted private keys.
+
+More about CSMS, V2G, MO and MF Bundles
+---------------------------------------
+
+* The ``v2g_ca_bundle`` is used to verify the installation of SECC leaf
+  certificates using the ``update_leaf_certificate`` command.
+* The ``csms_ca_bundle`` is used to verify the installation of CSMS leaf
+  certificates using the ``update_leaf_certificate`` command.
+* The ``mo_ca_bundle`` is used to verify contract certificates provided by the
+  electric vehicle as part of the ISO 15118 Plug & Charge process.
+* The ``mf_ca_bundle`` is used to verify firmware update files.
+
+New root certificates can be installed in the specified domain using the
+``install_ca_certificate`` command.