Add extracted tools: CitrineOS, OpenOCPP, ShapeShifter

- CitrineOS core extracted (CSMS OCPP 2.0.1)
- OpenOCPP extracted (firmware OCPP 1.6J/2.0.1)
- ShapeShifter library installed (pip install -e)
- ShapeShifter specification extracted
- EVerest extracted

TODO updated with progress

tools/EVerest-main/errors/evse_manager.yaml

@@ -0,0 +1,25 @@
+description: >-
+  Errors for EvseManager
+
+  All error codes that begin with MREC need to be implemented to fulfill the Minimum Required Error Codes defined by the ChargeX consortium:
+
+  https://inl.gov/content/uploads/2023/07/ChargeX_MREC_Rev5_09.12.23.pdf
+errors:
+  - name: Internal
+    description: Internal error of the state machine
+  - name: MREC4OverCurrentFailure
+    description: Over current event
+  - name: MREC5OverVoltage
+    description: Over voltage event
+  - name: MREC9AuthorizationTimeout
+    description: No authorization was provided within timeout after plugin
+  - name: PowermeterTransactionStartFailed
+    description: Transaction could not be started at the powermeter
+  - name: Inoperative
+    description: Charging is not possible. Usually caused by another error from one of the requirements.
+  - name: MREC22ResistanceFault
+    description: An Isolation Monitoring Device tripped due to low resistance to the chassis during active charging.
+  - name: MREC11CableCheckFault
+    description: Cable check failed. Isolation monitor self test failed before charging.
+  - name: VoltagePlausibilityFault
+    description: Voltage plausibility check failed. Standard deviation between voltage measurements from different sources exceeded threshold for configured duration.