Add extracted tools: CitrineOS, OpenOCPP, ShapeShifter
- CitrineOS core extracted (CSMS OCPP 2.0.1) - OpenOCPP extracted (firmware OCPP 1.6J/2.0.1) - ShapeShifter library installed (pip install -e) - ShapeShifter specification extracted - EVerest extracted TODO updated with progress
This commit is contained in:
@@ -0,0 +1,44 @@
|
||||
.. _htg_bring_up_powermeter:
|
||||
|
||||
##################
|
||||
BringUp Powermeter
|
||||
##################
|
||||
|
||||
In case your charger prototype has a power meter, it may be a good time
|
||||
to verify its functionality as well now - even though it is not strictly
|
||||
necessary for charging.
|
||||
|
||||
Write a bring-up config for your power meter and start it the same way
|
||||
as described in :ref:`htg_bring_up`. There are a few examples you can copy
|
||||
and modify, e.g. ``config-bringup-DZG.yaml`` or ``config-bringup-LEM.yaml``.
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
/etc/everest/run_tmux_helper.sh /etc/everest/bringup/config-bringup-mypowermeter.yaml /usr
|
||||
|
||||
Your setup should look like this:
|
||||
|
||||
.. image:: images/bring-up-powermeter.png
|
||||
:alt: Bring-Up Powermeter
|
||||
|
||||
Complete the following steps:
|
||||
|
||||
- Verify that the measurements come in regularly (e.g. every second).
|
||||
- Imported energy in Wh and timestamp are the only required values.
|
||||
Verify they are correct. For bidirectional metering, also verify the
|
||||
exported energy values.
|
||||
- Validate the other reported measurements.
|
||||
- If supported by the power meter (e.g. for
|
||||
:doc:`German Eichrecht </how-to-guides/eichrecht>`), click
|
||||
on “Start Transaction”. Verify that it replies correctly, and verify
|
||||
the time to reply is less than a few seconds.
|
||||
- Click on “Stop Transaction” and verify the reply. The reply should
|
||||
not take more than a few seconds.
|
||||
- Apply some test load if possible, and verify that the flow
|
||||
direction of energy is correct. A common mistake is to swap input and
|
||||
output of the meter. If you don’t have a test load, you can also test
|
||||
this when doing the first charging tests with a real car.
|
||||
|
||||
----
|
||||
|
||||
**Authors**: Cornelius Claussen
|
||||
Reference in New Issue
Block a user